COLORTRIBE_GREEN

Direct coloring, to create long lasting intense effects

3 WAYS TO USE

• The Colortribe series are not designed to cover gray hair, neither to be mixed with peroxides.
• It has to be applied pure, without being mixed with any hydrogen peroxide.
• The contact of Colortribe with oxidation colors or bleaching products modify the final color result.

1. HOW TO USE: PURE COLOR

To obtain maximum color intensity on previously bleached base, long lasting

Preconditions:
It requires pre-lightening the base up to the level of FPR 9 Light Blonde.

• Using a brush, apply the color pure on damp hair (previously washed with a BBCOS     shampoo. Do not use the conditioner).

• Massage and leave on for 15-20 minutes, depending on the porosity of the hair and the intensity desired.

• Rinse thoroughly with water (make a shampoo only when necessary). Apply PH
  balancer; leave on for 5-10 min, then rinse.

• Proceed with drying.

2. HOW TO USE: INTENSIFIER / REVIVER

This method is used to give a reflection to any tone natural or artificial; Also to intensify fashionable shades of previously colored hair with Innovationevo or KeratinColor.

A. INTENSIFYING
To enrich the chosen shade with a naturalor artificial tone at any level.
(Do not use on white hair).

How to use:

• Using a brush, apply the pure color on washed hair without first use of conditioner. If possible, avoid contact with the skin.  (Previously washed with a BBCOS shampoo. Do not use the conditioner).

• Pose the product from 5 to 20 minutes, depending on the desired intensity;
  (To obtain maximum intensity and duration, after application of the product coating the hair with a plastic cap and put it under a heat source for 15 minutes).

• Rinse thoroughly and apply the BBCOS pH balancer.

• Rinse and proceed as desired.

B. REVIVER
To revive the maximum brilliance, intensity and duration of fashionable colors
Innovationevo or KeratinColor.

How to use:

• Wash your hair with a professional BBCOS shampoo.

• Stir in the ratio 1: 4 the desired nuance Colortribe (1 part) with BBCOS PH balancer
  (4 parts) and apply on hair. If possible, avoid contact with skin.

• Leave on for 5-10 min. depending on the desired intensity while massaging the           hair.

• Rinse thoroughly and proceed as desired.

3. HOW TO USE: PASTEL

To get all the pastel shades with the desired intensity.

How to use:

FORMULA FOR NATURAL BLONDE HAIR LEVEL 9-10 or on 80/100% white base.

• Mix in a bowl the chosen shade with NEUTRAL 0, in proportions as shown in the
  below table. With a brush apply the mixture on washed and dried hair but not conditioned (starting with the length and tips).

• Leave on a pose for 5/20 minutes depending on the desired intensity while massaging the hair.

• Rinse thoroughly and apply the BBCOS pH balancer, rinse and proceed as desired.

HOW TO GET A PASTEL SHADE Guide to desaturation.
When it is necessary to dilute the colors to get pastel shades or the intensity wished.